A new DEWALT DW9057 Power Tool Battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder DEWALT DW9057 may require three to four charge/discharge cycles before achieving maximum capacity. New DEWALT DW9057 needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Power Tool Battery pack in a fully charged staged for storage.When charging the DEWALT DW9057 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure
It is important to condition (fully discharge and then fully charge) the DEWALT DW9057 every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that DEWALT DW9057 be removed from the device and stored in a cool, dry, clean place.
Cordless Angle Drill
Invest in a good charger for your power tools. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your power tools.
Be sure to store your Power Tool Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your DEWALT DW9057 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.
Christmas Sales DEWALT D28110 4-1/2-Inch Small Angle Grinder 201
Dec 12, 2011 19:54:17
Click for larger image and other views
Christmas Sales DEWALT D28110 4-1/2-Inch Small Angle Grinder Feature
- 7.0 Amp ac/DC, 11,000 rpm motor designed for faster material removal and higher overload protection
- Quick-Change Wheel Release allows tool free wheel removal without need for a wrench
- Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces
- Oversized, protected spindle lock button provides easier and quicker wheel changes
- 2-position removable side handle provides increased comfort and control; Slim, ergonomic body design provides increased comfort in extended use applications
Christmas Sales DEWALT D28110 4-1/2-Inch Small Angle Grinder Overview
The powerful DEWALT D28110 4 1/2-Inch Small Angle Grinder is compact enough to fit in tight places for a wide variety of grinding and cutting applications. Its ergonomic body is easy to manipulate, and its durable components make this small angle grinder an easy all-around pick.
|
 Powerful 7 amp motor delivers 11,000 rpm to satisfy both cutting and grinding needs. View larger. |
 This small angle grinder features a two-position side handle for maximum control in tight spaces. View larger. |
Versatile and aggressive, this small angle grinder features a 1.1-horsepower, 7 amp motor that's designed to deliver 11,000 rpm for efficient material removal. Its jam-pot design provides precise gear alignment and allows the grinder's transmission to be smooth and quiet. Also, the low-profile gear case allows the tool to fit easily into tight spaces, so you waste less time hand-finishing hard-to-reach areas.
Designed for Comfort and Convenience
Getting the job done quickly and effectively is all about maneuverability. This paddle-switch tool weighs 4.1 pounds and features a switch lock-on and multiposition side handle for multiple grip options. The oversized spindle-lock button and Quick-Change Wheel Release keep allow for tool-free wheel removal. In addition, the grinder's matching wheel flanges allow it to be used with a wide range of common accessories.
The D28110 4-1/2-Inch Small Angle Grinder comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What's in the Box
D28110 DEWALT 4 1/2-Inch Small Angle Grinder, two-position side handle, depressed center wheel, adjustable guard, and wrench.
 |
SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas DEWALT D28110 4-1/2-Inch Small Angle Grinder ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
